RADON HELP IN COLUMBIA, MO

Radon tested high? Here's what to do next.

Clear local guidance and mitigation quotes for Columbia and Boone County.

  • Basements, crawl spaces and slab homes
  • Certified-professional options
  • No-pressure quote request
Exterior view of a Columbia, Missouri suburban home with a discreet white radon mitigation pipe

Get a radon quote

Select your situation to get started.

Your information is only used to respond to your request.

Serving Columbia and Boone County

Local information for local homeowners.

Missouri guidance, clearly explained

From testing to mitigation, in plain language.

Built around your test result

Practical next steps, not guesswork.

UNDERSTAND YOUR NUMBER

What your result means

Radon is measured in picocuries per liter (pCi/L). Here is what different levels mean.

or

At or above 4.0 pCi/L

Missouri and EPA guidance recommends taking action to fix the home. This is the EPA action level.

2.0

Between 2.0 and 4.0 pCi/L

Consider taking action and review the test conditions. There is no truly safe level of radon.

2.0

Below 2.0 pCi/L

Lower does not mean zero risk. Future testing may still be appropriate, especially after major renovations.

A homeowner reviewing a radon test result document at a dining table

THE PROCESS

How radon mitigation works

A mitigation system creates sub-slab depressurization to draw radon from beneath your home and vent it safely outside.

Clean basement interior showing a white radon mitigation pipe with a manometer attached

A typical radon mitigation system vents radon safely above your home.

1

The home and test result are assessed

A qualified professional reviews your test result, foundation type, and home layout.

2

The correct suction point and system design are selected

The system is planned based on whether you have a basement, crawl space, or slab.

3

Radon is drawn from beneath the home

A pipe and fan create sub-slab depressurization, pulling radon gas from under the foundation.

4

The gas is vented safely above the roofline

Radon is exhausted outdoors, above the roof, where it disperses harmlessly.

5

Post-mitigation testing checks the result

A follow-up test confirms the system has reduced radon levels below the action level.

COST PREVIEW

How much does radon mitigation cost?

Missouri DHSS reports that mitigation commonly ranges from approximately $500 to $2,500, depending on the home's size and construction.

Typical range: $500–$2,500

Per Missouri DHSS guidance

An actual quote may depend on:

  • Foundation type
  • Number of suction points
  • Crawl-space work
  • Pipe routing
  • Electrical requirements
  • Post-installation testing
  • System warranties
See the full cost guide
Suburban Columbia home with exterior radon mitigation pipe visible on the side wall

Free Missouri radon test kit

Missouri residents may request one free short-term radon test kit per household while supplies last through the Missouri DHSS.

Columbia Radon Guide does not distribute test kits. Requests are fulfilled directly by the Missouri Department of Health and Senior Services, subject to availability.

Request from Missouri DHSS

Missouri DHSS reports that radon is present in every Missouri county, and that one in three homes tested through its residential testing program had results above the recommended action level.

ColumbiaAshlandHallsvilleCentraliaHarrisburgRocheportSturgeonHartsburg

SERVICE AREA

Columbia and Boone County

Our guidance focuses on Columbia, Missouri and the surrounding Boone County communities.

ColumbiaAshlandHallsvilleCentraliaHarrisburgRocheportSturgeonHartsburg

READY TO ACT?

Request a local radon quote

Get a free, no-obligation quote from a local radon professional serving Columbia and Boone County.

No obligation to proceed
Local to Columbia and Boone County
Clear next steps for your home

Ready to talk about your result?

Your information is only used to respond to your request.